RECOMMENDED USE

For exterior and interior concrete surfaces

PAINTING INSTRUCTIONS

Application Method :
Brush / Roller / Spray

Thinning :
Dilute with not more than 5% water

Mixing Ratio:
Mix 4 volume parts of DAVIES® SUN & RAIN® Elastomeric Paint to 1 volume part DAVIES® SUN & RAIN® Elastomeric Hyper Gloss.

Note:
A slight reduction in hiding will be noticed after mixing the DAVIES® SUN & RAIN® Elastomeric Paint and DAVIES® SUN & RAIN® Elastomeric Hyper Gloss. Do not add more than the specified amount of DAVIES® SUN & RAIN® Elastomeric Hyper Gloss

SURFACE PREPARATION
A. New Concrete:
• New concrete and cement plastered surfaces must be thoroughly cured for 28 days before painting, having a moisture content of less than 15% and a pH below 9.
• Remove concrete laitance and other impurities.
• Thoroughly clean the surface and ensure that it is dry, free from oil, grease, loose materials and other possible contaminants.

B. Previously Painted Concrete:
• Thoroughly clean the surface and ensure that it is dry, free from oil grease, loose materials and other possible contaminants.
• If the surface is powdery and chalky, scrub and clean with water before applying one coat of DAVIES® Liquid Tile® Penetrating Sealer.
• For mildew and molds, treat with 1 part liquid bleach and 3 parts water solution. Rinse with water and allow the surface to dry before painting.

Painting System:
Concrete Surfaces:
Primer/Sealer: Apply one (1) coat of DAVIES® 1350 Megacryl® Concrete Primer & Sealer or SR-BM Buena Mano
Putty: As needed, Apply DAVIES® 5000 Megacryl® Concrete Putty on surface imperfections
Primer/Sealer: Apply one (1) coat of DAVIES® 1350 Megacryl® Concrete Primer & Sealer or SR-BM Buena Mano on puttied surfaces
Topcoat: Apply two (2) coats of DAVIES® SUN & RAIN® and DAVIES® SUN & RAIN® Elastomeric with Hyper Gloss Mixture

Clean-up : Clean Water