RECOMMENDED USE

For patching up surface defects on wood such as wood knots, nailholes, cracks and joints.

PAINTING INSTRUCTIONS

Application Tools :
Putty Knife

Thinning:
Use as-is. Do not add thinner or reducer.

Surface Preparation:
Wood

A. New Surfaces:
• All areas to be painted must be dry and free of dirt, dust, grease, oil, and other contaminants.
• For open grain wood, apply DAVIES® 77 Laxtite Lacquer WoodDough using a putty knife. Let dry for 1 to 2 hours and sand. Dust off completely, then wipe with a clean rag.

B. Previously Painted Surfaces:
• Do not apply over previously painted, varnished, or enameled surfaces. The painted or lacquered surface should be stripped to bare wood using DAVIES® 300-X Strip-Eze Paint Remover.
• For open grain wood, apply DAVIES® 77 Laxtite Lacquer WoodDough using a putty knife. Let dry for 1 to 2 hours and sand. Dust off completely, then wipe with a clean rag.

Application:
Apply with a putty knife along the grains of the wood and allow to sit for 15 minutes. Wipe off any excess across the grains and let dry.

Painting System:
Putty: Apply DAVIES® DV-77 LAX-TITE Wood Dough
Woodstain: Apply 1-2 coats of DAVIES® Oil Woodstain
Primer/Sealer: Apply one (1) coat of DAVIES® 701 Hi-Solids Sanding Sealer
Topcoat: Apply 2-3 coats of either DAVIES® 702 Hi-Solids Clear GlossLacquer or DAVIES® 703 Hi-Solids Dead Flat Lacquer or DAVIES® 704 Hi-Solids Water White Gloss Lacquer

Recoating Interval: 15 minutes

Drying Time (to Sanding): 15-30 minutes

Clean-Up: DV-71 Lacquer Thinner

STORAGE AND HANDLING

• Keep container closed when not in use.
• Store in a cool, dry and well-ventilated space.
• Do not transfer contents to other containers for storage.
• In case of spillage absorb with inert materials such as sand.