FEATURES

• Excellent adhesion to concrete and wood surfaces
• Excellent alkali resistance
• Very good water resistance

RECOMMENDED USE

For concrete walls and properly primed wood surfaces

PAINTING INSTRUCTIONS

Application Tools :
Brush / Roller / Spray

Thinning:
For brush/roller application, dilute with not more than 10% DAVIES® DV-5-70 Liquid Tile® Reducer
For spray application, dilute with not more than 25% DAVIES® DV-5-70 Liquid Tile® Reducer

Surface Preparation:
Concrete Surfaces
A. New Concrete:
• New Concrete and cement plastered surfaces must be thoroughly cured for 14 to 28 days before painting.
• Remove concrete laitance and other impurities.
• Thoroughly clean the surface and ensure that it is dry, free from oil, grease, loose materials, and other possible contaminants.

B. Previously Painted Concrete:
• Thoroughly clean the surface and ensure that it is dry, free from oil grease, loose materials, and other possible contaminants.
• If the surface is powdery and chalky, scrub and clean with water before applying one coat of DAVIES® Liquid Tile® Penetrating Sealer.
• For mildew and molds, treat with 1 part liquid bleach and 3 parts water solution. Rinse with water and allow the surface to dry before painting.

Painting System:
Plain Finish
Sealer: Apply one (1) coat of DAVIES® DV-5-530 / DV-5-531 Liquid Tile® Penetrating Sealer
Putty: As needed, apply DAVIES® 5-1000 Putty Filler on surface imperfections
Primer: As needed, Apply DAVIES® DV-5-700 Liquid Tile® Primer on puttied surfaces
Topcoat: Apply two (2) coats of DAVIES® Liquid Tile® Topcoat Finish

Textured Finish:
Sealer: Apply one (1) coat of DAVIES® DV-5-530 / DV-5-531 Liquid Tile® Penetrating Sealer
Cast: Apply one (1) coat of DAVIES® 5-900 Liquid Tile® Cast
Primer: Apply one (1) coat of DAVIES® DV-5-700 Liquid Tile® Primer
Topcoat: Apply two (2) coats of DAVIES® Liquid Tile® Topcoat Finish

Recoating Interval: 2-3 hours

Clean-Up: DAVIES® DV-5-70 Liquid Tile® Reducer

STORAGE AND HANDLING

• Keep container closed when not in use.
• Store in a cool, dry and well-ventilated space.
• Do not transfer contents to other containers for storage.
• In case of spillage absorb with inert materials such as sand.