FEATURES

• Outstanding heat resistance
• Excellent weatherability
• High-performance humidity resistance
• Excellent anti-corrosion protection against water, salt, chemicals, and solvents
• Very good flexibility and hardness balance

RECOMMENDED USE

Exhaust Systems, Engine Parts, Boilers, Furnaces, Ovens, Chimneys,Gas Heaters, and Incinerators

PAINTING INSTRUCTIONS

Application Tools :
Brush / Spray

Surface Preparation:
A. New Surfaces
• All surfaces must be clean, dry, free from dust, dirt, chalk, laitance, efflorescence, rust, grease, oil, and all other foreign materials.
• Wipe off oil and grease with solvent or lacquer thinner
• Remove rust, mill scale, and stains with sandpaper, wire brush, or other abrading methods.
• Treat iron surfaces with a heavy coating of rust and scale withDAVIES® 200-X Greco Rust Converter, wipe off the residue, and clean with lacquer thinner.
• Apply the appropriate metal primer immediately after cleaning and drying to avoid the onset of corrosion.

B.Previously Painted Surfaces
• If the existing paint is sound and shows slight chalking, sand lightly and wipe off dust
• Remove cracked, peeling off old paint by scraping, wire brushing, or sanding. Use DAVIES® 300-X Strip-Eze Paint Remover to aid in scraping off old paint.
• Treat heavily corroded surfaces with DAVIES® 200-X Greco Rust Converter, wipe off the residue, and clean with lacquer thinner
• Apply the appropriate metal primer immediately after cleaning and drying to avoid the onset of corrosion.

Painting System:

Metal Surfaces
First Coat: Apply one (1) coat of DAVIES® 472 HI-Heat Resisting AluminumTopcoat
Second Coat: Apply one (1) coat of DAVIES® 472 HI-Heat Resisting AluminumTopcoat

Recoating Interval: 1-2 hours

Drying Time: For optimum film properties, cure for one hour at a minimum of 450⁰F and a maximum of 1,200⁰F temperature

Clean-Up: DAVIES® 40 Paint Thinner

STORAGE AND HANDLING

• Keep container closed when not in use.
• Store in a cool, dry and well-ventilated space.
• Do not transfer contents to other containers for storage.
• In case of spillage absorb with inert materials such as sand.