Davies Concrete Neutralizer
DAVIES® Concrete Neutralizer™ is a superior conditioner to be mixed with water to neutralize lime activity in new interior and exterior masonry surfaces,
thus, improving paint adhesion and durability.
Type: Acid
Color/Clarity: Clear Liquid
Practical Coverage: 30-40 sqm / 4 Liter / coat depending on
surface porosity
Pack Sizes: Quart and Gallon
RECOMMENDED USE
Treatment for neutralizing masonry surfaces where alkalinity is
present
PAINTING INSTRUCTIONS
Application Tools :
Brush / Roller
Surface Preparation:
Allow new concrete to cure and dry completely for at least 28 days with a moisture content of less than 15% and a Ph level below 9.
Product Preparation:
Add 1 pint of DV-100-X Davies Concrete Neutralizer to 2 gallons of water, then stir thoroughly.
Application:
Apply by brush or roller until the surface is wet. Allow to dry for 24 hours, then brush off white crystals that will form on the surface.
Drying time: 24 hours
Clean-Up: Clean Water
CAUTION!
Keep away from heat and open flame. Use with adequate ventilation. Rubber gloves are strongly recommended for handling the solution. Avoid prolonged skin contact and repeated breathing of vapors. Wash skin immediately when it comes into contact.
STORAGE AND HANDLING
• Keep container closed when not in use.
• Store in a cool, dry and well-ventilated space.
• Do not transfer contents to other containers for storage.
• In case of spillage absorb with inert materials such as sand.
